Updating and Connecting To WiFi

This page will help you to flash and update your Everything Presence One to the latest version!

Everything Presence One ESPHome Firmware Install

Here you can install the latest firmware on the Everything Presence One for direct integration with Home Assistant or Samsung Smartthings (Beta).

First, make sure you have the EP1 connected to a USB port on your computer and select the platform you would like to install below. Hit the connect button, select the USB port from the list and then hit the install button to begin installing the latest software on your Everything Presence One.

Once the install has completed, you can then connect the EP1 to your WiFi easily and securely.

If you do not see a “Connect” button below, use a supported web browser like Google Chrome.

After clicking the “Connect” button, if you do not see a “USB Serial” port listed, or you get the error “Failed to open serial port.”, you may need to install the CH340 driver. The installer should give you links to the latest driver.

Select Smart Home Platform:

Home Assistant

Choose this for Home Assistant integration, with additional options for Bluetooth.

SmartThings

Choose this option to integrate with SmartThings

Select Your mmWave Sensor Model:

DFRobot SEN0395

Select this option if you are using the DFRobot SEN0395 sensor (6 Pin).

DFRobot SEN0609

Select this option if you are using the DFRobot SEN0609 sensor (5 Pin).

Select Add-on Module:

No Add-on Module

Proceed without any add-on module.

CO2 Module

Select this if you are using the CO2 add-on module.

Select Board Revision:

Revision 1.3/1.4

Select this if your board revision is 1.3 or 1.4.

Revision 1.5

Select this if your board revision is 1.5.

Select Firmware Type:

Bluetooth Proxy

Enable Bluetooth Proxy and Improv. May affect WiFi connectivity.

No Bluetooth

Choose this option to disable Bluetooth Proxy and Improv, which can improve stability of the WiFi connection and/or you don't need Bluetooth Proxy.

Select Firmware Version:

Stable

Choose this for a stable version of the firmware.

Beta

The Beta release includes target tracking and distance zones. Do not use unless you are comfortable with troubleshooting and reporting bugs.

Select Your mmWave Sensor Model for SmartThings:

DFRobot SEN0395

Select this option if you are using the DFRobot SEN0395 sensor for SmartThings.

DFRobot SEN0609

Select this option if you are using the DFRobot SEN0609 sensor for SmartThings.

You are flashing:

Next Steps

With the EP1 fully updated and connected to WiFi, the final step is to connect it to Home Assistant or Samsung Smartthings (Beta)!

Connecting to Home Assistant Connecting to SmartThings